What do you do when your car says check gages?

2 min read

What do you do when your car says check gages?
Pull over to a safe spot, well lit at night, and look over the dashboard gauges. One of the other gauge lights should be lit. That will be what the Check Gauge light was warning you about. It could be as simple as you are running out of gas or as serious as your engine is having problems.

In respect to this, what does it mean when your car says check gages?

Usually when the Check Gauges light illuminates it is due to one of the gauges going out of range, such as your electrical system, low engine oil or other type of fluids being monitored through the gauges.

Furthermore, what does check gages light mean on a Dodge Durango? The check gages light comes on when i step on the breaks Check your battery voltage and your alternator output. When you step on the brakes, your foot is off the gas and the brake lights turn on. That drops the voltage and causes one or more of your gauges to go out of range and light the “Check Gauges” warning.

Herein, what does check gages mean on Jeep?

The “Check Gauges” light means just that. Look at all the gauges while engine is running and see which one is not in it’s normal range. Gas gauge doesn’t matter. I suspect it is the oil pressure gauge is trying to tell you something, especially if you say there is a rattle when you drive (engine clatter).

What does check gauges mean on a Ford f150?

it means a gauge is out of normal range. low oil pressure, voltage high or low, temp too high? 15 people found this helpful. 130. GuruVSJ6W answered about a year ago.

How do you check oil level?

To check your oil levels, do the following:

  1. Park your car on a level surface and wait for the engine to cool down.
  2. Locate your dipstick, which should be on top of your oil tank.
  3. Pull your dipstick all the way out, and wipe it off with a rag or cloth.
  4. Insert the dipstick all the way in, and pull it out.

How high should oil pressure?

Ideally, oil pressure should be between 25 to 65 psi when the oil is warm. A reading of 80 psi or higher means that there is a serious issue that needs to be resolved.

What does check gages mean on a GMC Envoy?

GMC Envoy 2002. OK. The check gauges warning comes on because of the low oil pressure problem. To be sure, an oil pressure gauge would need to be installed on the engine to check the actual internal oil pressure of the engine. This would normally cause engine noises.

What does check gauges mean on a Jeep Grand Cherokee?

when the check gauges light comes on look at your dash and see what gauge is not reading properly, either temp or oil gauge. It should read between 13 to 15v if the gauge falls below 13 there is a fault in the charging system.

What does check engine light mean on Jeep Cherokee?

The Check Engine indicator light is part of your car’s onboard diagnostic system or OBD. The Check Engine Light on your vehicle can mean anything from a loose gas cap and poor emission standards to a failing engine.

What are gages in a truck?

Auto, Car, Truck Gages. All modern cars and trucks have gages and lights to warn the driver of problems and give them information on things like fuel level and speed. Some vehicles have only gages. On some the only gage is the speedometer and fuel gage.

Leave a Reply

Your email address will not be published. Required fields are marked *