What is a third on a tape measure?

2 min read

What is a third on a tape measure?
A standard tape measure (or ruler) is divided up into feet and inches. Each foot is divided into 12 inches. The problem starts with the subdivision of the inches. The third shortest line is the 1/8” (one eighth of an inch) and there are four of those.

People also ask, what is 1/3 of an inch on a tape measure?

1/3”= nearest to 0.85cm so 8mm or 9mm or somewhere I between if you can manage it! The ridiculous idea is that you need to be accurate with such approximate equipment. If you need to be more accurate than 8–9mm or 5/16” then you need proper measuring devices.

One may also ask, what are the lines on a tape measure? The small, tight, narrow lines between centimeter markings represent millimeters (or one-tenth-centimeters). There are ten millimeters in a centimeter (and, thus, one thousand in a meter.) If your measuring tape doesn’t have 0.5 centimeter markings, the fifth millimeter after each centimeter marks the 0.5 centimeter.

In respect to this, what is 3 quarters on a tape measure?

3. Quarter inches, eighth inches, and sixteenth inches. Most standard tape measures in the U.S. have markings that measure down to 1/16 of an inch. These are smaller, sometimes thinner markings, evenly spaced between the half-inch and inch marks on a tape measure.

How do you read a 1/32 tape measure?

To see how many thirty-seconds the object is in addition to the inches, count the number of 1/32 lines beyond the inch mark. If the tape measure is only marked in 1/16 inches, count the number of 1/16 lines, multiply by two and add one if the length is half of the distance toward the next mark.

What is half of 1/3 8 on a tape measure?

Half of the number is nothing but dividing that number into two equal parts. So to calculate half of a number simply divide the number by 2 whether the given number is whole number or a fraction. Half of 3/8 = ((3/8)/2)=> (3/8)*(1/2)=3/16.

What comes after 7 8 on a tape measure?

As an example, the image below shows a length that goes from the inch mark to an unlabeled marking. We know it’s more than 3/4 of an inch and less than one full inch. The marking is half way between 3/4 (6/8) and 7/8. Therefore, the marking is half of 1/8, or 1/16.

How do you find 1/3 of a number?

To identify what 1/3 of something is, you technically have two options:

  1. Divide by 3.
  2. Multiply by 1/3 (which is the same thing)

What is half of 5/8 on a tape measure?

1 Expert Answer Multiply 5/8 by 1/2.

What is 19 32 on a tape measure?

Realize that 19/32” is between 18/32” and 20/32”. 18/32” reduces to 9/16” and 20/32” reduces to 5/8”, therefore 19/32” is the 1/32 mark between 9/16” and 5/8”.

What is 1/8 on a tape measure?

The 1/8-inch mark is located between any two 1/4-inch marks. Most work tends to stop at this point, though in some cases you will need to measure down to the 1/16-inch mark. The 1/16-inch mark is the absolute shortest line on the tape measure.

What comes after 1/8 of an inch?

Fraction, Decimal, and Millimeter Equivalent Measurements

Fraction Decimal Millimeters
1⁄16” 0.0625 1.5875
1⁄8” 0.125 3.175
3⁄16” 0.1875 4.7625
1⁄4” 0.25 6.35

What is the mark at 19 3/16 on a tape measure?

The black diamonds which appear every 19 3/16” on metal tape measures are for spacing I-beam “timbers”. Several wood-product manufacturers offer I-beam “timbers” as a substitute for solid lumber floor joists. The diamond marks on our tape rule blades are for spacing these engineered floor joists in new construction.

What is an 8th of an inch in decimal?

Fractional Inches to Decimal Inches

Fraction Decimal Inches Millimeters
3⁄32” 0.09375 2.38125
7⁄64” 0.109375 2.778125
1⁄8” 0.125 3.175
9⁄64” 0.140625 3.571875

What is 13 16 on a tape measure?

Inch Fraction Decimal and Millimeter Equivalents

Fraction Decimal Millimeters
3⁄4” 0.75 19.05
13⁄16” 0.8125 20.6375
7⁄8” 0.875 22.225
15⁄16” 0.9375 23.8125

Why is 16 inches marked on a tape measure?

Standard US construction practice separates wall studs by 16 inches. Marking these on the tape makes it easier for the carpenter to see the relevant multiples.

What is 7/8 on a ruler?

The red marks on this ruler are at 1/16, 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, and 1. When marking down a distance from a ruler, mark the whole inch, followed by a space, then the fraction of an inch. For example, 1 1/2, or 2 3/8.

What is half of 5/8 in fraction form?

5/8 ÷ 2 = 0.3125 in decimal form.

How many 16ths are in an inch?

In this case, there are 16 units of smaller quantity (1/16 inch) in one unit of the larger quantity. Multiply the larger-quantity amount by the number of smaller units per unit of the larger quantity. Multiplying 16 by 0.5 gives you 8, so 8/16 equals 0.5 inches.

How many 32nds are in an inch?

mm to Inch Conversion Chart
mm Inches (approximate)
16 5/8 20/32
17 11/16 21/32
18 11/16 23/32

What are the lines on a ruler?

To read a metric ruler to measure centimeters, look at the long lines on the ruler that are numbered 1-30, which are the centimeter marks. The distance between them is equal to 1 centimeter. There are smaller lines between the larger centimeter lines, which represent millimeters.

How many eighths are in an inch?

Therefore, there are 8 – 1/8 inch that make up 1 inch.

Leave a Reply

Your email address will not be published. Required fields are marked *