# What is equivalent to a 15mm wrench?

What is equivalent to a 15mm wrench?
Wrench Size And Conversion Table

Inches Millimeters Spanner
0.563 9/16 AF
0.591 15mm
0.600 5/16 Wworth; 3/8 BSF
0.625 5/8 AF

Also know, what is equivalent to a 15 mm wrench?

Wrench Size Chart for Bolts

Bolt Diameter Wrench Size (Standard) Wrench Size (Metric)
3/8″ 9/16″ 15mm
7/16″ 5/8″ 16mm
1/2″ 3/4″ 19mm
9/16″ 13/16″ 21mm

Beside above, what is the equivalent to a 14mm socket? Standard / Metric Wrench Conversion Chart

Bolt Diameter Standard Metric
3/16″ 3/8″ 10mm
1/4″ 7/16″ 11mm
5/16″ 1/2″ 13mm
3/8″ 9/16″ 14mm

In this way, what is the SAE equivalent of 15mm?

SAE to Metric Conversion Chart

SAE Metric Inch
9/16″ 0.563
15mm 0.591
19/32″ 0.594
5/8″ 0.625

What is equivalent to a 12mm socket?

Wrench Conversion

. Wrench Conversion Table Equivalent Sizes
Differ-ence in 1/1000s of an inch Size in Inches Compares Standard and Metric wrench sizes (where they CLOSELY match, and where they don’t – wrench equivalence)
3.69 0.46875 Close enough 15/32 and 12mm
28 0.47244
12 0.50000

### Is 10mm bigger than 3 8?

It’s the same size. 3/8 is in inch and and its 10mm.

### How thick is 2mm in inches?

Millimeters to inches conversion table

Millimeters (mm) Inches (“) (decimal) Inches (“) (fraction)
1 mm 0.0394 ″ 3/64 ″
2 mm 0.0787 ″ 5/64 ″
3 mm 0.1181 ″ 1/8 ″
4 mm 0.1575 ″ 5/32 ″

### How many 32nds are in an inch?

mm to Inch Conversion Chart
mm Inches (approximate)
16 5/8 20/32
17 11/16 21/32
18 11/16 23/32

### What size bolt has a 14mm head?

Bolt Diameter (mm) Head/Wrench Size (mm)
ANSI/ISO JIS
8 13 12
10 16 14
12 18 17

### What is the next size up from 1/2 inch?

Ear Gauge to MM Conversion Table

Gauge Millimeters(mm) Inches
00g 10 mm 3/8″
11 mm 7/16″
12 mm 1/2″
14 mm 9/16″

### How do you get a rounded bolt out?

A quick way to get the bolt back to the good part of the threads is to wedge a small screwdriver or flat blade between the part and the bolt, nut, or screw head. Apply pressure to push the bolt out and unthread it. This works miracles. Sometimes the hole itself is stripped.

### What’s between 14mm and 15mm?

12mm = almost 15/32 inch (= almost 1/2 inch) 13mm = just over 1/2 inch. 14mm = almost 9/16 inch. 15mm = almost 19/32 inch.

### How are wrench sizes measured?

Multiply the first number which is the bolt size in inches or millimeters, by 1.5 using a pocket calculator, if necessary. For example, for the numbers in Step 1, 1/2 x 1.5 = . 75 or 3/4, which is the wrench size needed for this standard-sized bolt.

### What is the metric equivalent of 1/2 inch?

Inches to millimeters conversion table

Inches (“) Millimeters (mm)
1/4 ″ 6.35 mm
1/2 ″ 12.7 mm
1 ″ 25.4 mm
2 ″ 50.8 mm

### What is the metric equivalent of 3/4 inch?

Math for the Toolbox. SAE to Metric Conversion.

inch inch mm
3/4 0.750 19.050
49/64 0.766 19.447
25/32 0.781 19.844
51/64 0.797 20.241

### Is 9/16 and 14mm the same?

But thats no biggie ~ to answer your question, 9/16 SAE is actually 14.3 Metric, but it is the closest SAE size that will fit a 14mm metric head.

### Do I need metric and SAE wrenches?

Yes, you can use some sockets on both metric and SAE sizes. However, you need to be careful, as most times they are not exactly the same, and you can strip a bolt by using an SAE socket on a metric bolt and vice versa.

### Is 16mm bigger than 5 8?

yup, 16mm = 5/8“, and it’s so close that 8mm = 5/16, too! 19mm is almost interchangeable with 3/4″, and 13mm is only slightly off a 1/2” So if anything the 5/8 wrench will fit slightly tighter on a 16mm bolt.

### Is 7/8 the same as 22mm?

7/8” is 0.875″ and 22mm is 0.866142″ which means the 22mm would give a slightly tighter fit and thus be less likely to strip.

### What size is 10mm in SAE?

SAE to Metric Conversion Chart

SAE Size Metric Size Inches Decimal
10mm 0.394
13/32″ 0.406
11mm 0.433
7/16″ 0.438

### What is 16mm in SAE?

To answer your question directly – 5/16″ = 8mm, 7/16″ = 13mm, 5/8″ = 16mm, and 3/4″ = 19mm.

### What is a 10mm wrench in inches?

Wrench Size And Conversion Table

Inches Millimeters Spanner
0.344 11/32 AF; 1/8 Wworth
0.354 9mm 9mm
0.375 3/8 AF
0.394 10mm 10mm

in